Bogen 3041 Low Profile "Hexagonal" Quick release plate with 1/4 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 3130, 488RC0  and other Bogen heads.  This is the same "Hexagonal" quick release plate that Bogen has been using for years, except that it does not use a thumb screw and locking collar to attach to the cameras.  Instead it uses a flat, slotted screw that must be removed using a screw driver.  Not easy to put on and take off, but it allows many cameras to lay flat on the base rather than at an angle resting on the lens.

Bogen 3049 "Hexagonal" Quick release plate with 1/4 20 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0 and other Bogen heads. 

 Available in 1/4 for most 35mm and most digital cameras.  Large easy to grip thumb screw and locking wheel make this quick release plate easy to put on and off repeatedly.

You can buy the thumb screw and locking collar only
(shown left) as replacement parts that are sold separately.

Bogen 3048 "Hexagonal" Quick release plate with 3/8 screw.   Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 488RC0  and other Bogen heads.   Available in 3/8 for many larger and Hasselblad cameras.  Looks the same as above except with a 3/8 size screw.  You can buy the thumb screw and locking collar only as replacement parts that are sold separately in the pull down menu below.

Bogen 3159 "Hexagonal" Quick release plate with 1/4 screw.

Fits Bogen tripod models 3038, 3039, 3047, 3055S, 3055, 3063, 3130, 488RC0  and other Bogen heads.   Includes the VHS locator pin for video cameras that keep the camera from rotating while pointed up, down or at angles.

Bogen 3157AN Quick release plate with 3/8 screw. Fits Bogen tripod models 3030, 3030G, 3039, 3130, 3130G, 3262QR, 3265, 3265G, 3410, 3413QR, 3437, 390RCNAT, 390RC2, 468RC2, 484RC2, 486RC2, 488RC2, and other Bogen heads.   Available in 3/8 for many larger and Hasselblad cameras.

Bogen 3272 Quick release plate supplied with two each of the 1/4 20 thread and 3/8 screws and video anti-twist alignment pin.  Designed to slide back and forth on head for perfect set up.  Fits Bogen tripod models 3421, 3273, 3274, 3147, 3147-10,  510, 510-10, 516 Bogen professional video heads.  Looks similar to the 3444PL plate, but is longer. 

Dimensions are: 5 1/2 inches long X 2 3/16 inches wide X 3/16 inch thick
                                  140mm long X 55mm wide X 10mm thick

Click on picture to see quick release at about life size.

Bogen 3433PL Quick release plate with 1/4 20 thread and 3/8 screws and video anti-twist alignment pin. 

Cast aluminum plate with rubber gripper pads.

Fits Bogen tripod models 3433 and 501 Bogen video heads.  

Quickly and easily adapt almost any tripod to a quick release model.  The adapter screws into the 1/4 -20 screw on most tripods.  Use the standard Bogen 3157N Quick Release Plate on your camera, video camera, digital camera, binoculars or other devices.  Large thumb release and secondary brass safety catch make this unit the best, most secure on the market.  Purchase additional quick release plates below.