|
Products |
| Clamps |
| Heads |
| Quick Adapters |
| Other Links... |
|
All
Our Favorite Gifts |
|
Bogen Tripod Parts |
| KEH.com |
|
Paulmsoft Software |
|
Spartan Photo Center |
|
Giottos Quick Release Cross Reference Find your tripod listed here and you may purchase the correct quick shoe below. |
|||
| Tripod or Head | Quick Release | Tripod or Head | Quick Release |
| BL-1150 | BLQ-100 | P-Pod | 6E06 |
| IK324 | 6E01 | ||
| IY-332 | 6E01 | ||
| IY-442 | 6E02 | ||
| M7001Ball Head with 621 |
601 short 611 long |
||
| MH-100 | MH-101 | ||
| MH-200 | MH-201 | QU-100 | 6E11 |
| QU-400 | MH-311 | ||
| MH-500 | MH-501 | RHD-124 | 6E05 |
|
MH-511 quick release is discontinued |
MH-642 is the direct replacement |
||
| MH-621 |
601 short 611 long |
VT-806 | 6E01 |
| MH-652 | MH-642C cork top | VT-808 | 6E01 |
| MH-655 | MH-645 | VT-809 | 6E01 |
| MH-656 | MH-646 | VT-901 | 6E01 |
| MH-657 | MH-647 | ||
| MH-658 | MH-648/MH-649 | 400101 | 6E11 |
| MH-5001 | MH-6421 rubber top | 403755 | 6E06 |
| MH-7001 |
601 short 611 long |
405001 | MH-642 |
| MV 825 | MH-642 | ||
| MV-8250 monopod | 6E01 | ||
| Giottos Quick Rlease Plates |
|
BLQ-100 |
|
MH-101 Quick Release to fit the MH-100 Adapter and others Discontinued with limited availability. |
|
MH-201 |
|
MH-501 |
|
MH-511 |
|
MH-642 |
|
MH-645 Made from durable aluminum. Features: ARCA compatible + Calibrated sliding plate + Safety Lock + 1/4 inch screw on all plates + Lift up ring for tightening camera screw Measures: Length 1 5/8 in X Width 2 in |
|
MH-646 Made from durable aluminum. Features: ARCA compatible + Calibrated sliding plate + Safety Lock + 1/4 inch screw on all plates + Lift up ring for tightening camera screw Measures: Length 2 in X Width 2 in |
|
MH-647 Made from durable aluminum. Features: ARCA compatible + Calibrated sliding plate + Safety Lock + 1/4 inch screw on all plates + Lift up ring for tightening camera screw Measures: Length 2 3/8 in X Width 2 in |
|
MH-648 Made from durable aluminum. Features: ARCA compatible + Calibrated sliding plate + Safety Lock + 1/4 & 3/8 inch screws + Lift up ring for tightening camera screw Measures: Length 3 1/2 in X Width 2 in |
|
MH-649 Made from durable aluminum. Features: ARCA compatible + Calibrated sliding plate + Safety Lock + 1/4 & 3/8 inch screws + Lift up ring for tightening camera screw Measures: Length 5 1/2 in X Width 2 in |
|
MH-601 |
|
MH-611 |
6E01 |
|
6E02 |
|
6E04 |
|
6E05 |
6E06 or P-Pod  Check the Dimensions since this is twice the size of the QU-100 quick plate |
|
6E11 Mini Tripod Quick Release This is the small round Quick Release that attaches to the QU-100 table top tripod.  |
|
Professional Mini Tripod |
|
  Easy
to carry: The U.Pod can easily be carried with the
camera still attached. Or used like a grip.Use like a tripod: Open the three legs and slide them to the bottom of the center column. Tighten them by turning the D-shaped ring on the bottom knob.  Use like a monopod: Pull the second section of the center column to its end, close the legs and you can use it as a monopod. You can extend its height by loosening the locking knob and pulling up on the center column. Tighten the knob to lock into position.  Special
bags and its specification: The U. Pod folded takes up
very little space and is very convenient for travel or for keeping in your
gadget bag. A tote bag with draw string closure is provide to ensure that the U.
Pod is kept clean and does not scratch your other equipment. This series has
three models. |
|
 Quick
shoe and 2-way head. The QU-100 head is designed with a quick release mechanism
for quick mounting and
unmounting of the camera. Locking knob turns to either tighten the release or
remove it. The 2-way head is adjustable through 180 degrees.1/4 inch mounting screw. Attached strap of added security and convenience. Folded
size: 245mm |
 The
QU-200 does not have a quick release on the ball head. The QU-200 ball head
allows for complete adjustment th rough
any angle while the camera is horizontal plus a fixed 90-degree tilt to place
the camera in a vertical position.1/4 inch mounting screw. Attached strap of added security and convenience Folded size: 245mm Extended size: 356mm Base Diameter: 36mm Weight: 265g Loading weight: 3 kgs Made of: ADC-12 (Aluminum CNC) |
Special thanks to Robert Sewell who helped identify the 6E01 quick release will fit the IY-332 tripod. Without customers like you we couldn't do what we do.
and
credit and debit cards.