Bilora Quick Releases

Bilora Quick Release Cross Reference The following quick releases that use the DIN 4503 standard and are marked with DIN 4503. Specific models or series we've identified are listed below. If the opening is 42mm square then these should work in your Bilora tripod. You can use any below depending upon whether you would like a large or small plate, and whether you need a 1/4-20 standard screw or a larger 3/6-16.
Bilora Favorit	810
	830	6144

Bilora Tripod Quick Releases

CU-81 Standard Quick Release Plate

Standard 1/4 - 20 screw for most 35mm cameras

CU-82 Standard Quick Release Plate

Larger 3/8 screw for most medium format cameras

QS- 29 Quick Release

This picture is for illustration only. The actual quick release is similar, though texture, screw head, polish and finish may be different.

Has the 1/4 screw for most cameras with that use the
video anti-rotation pin

CU-83 Standard Quick Release Plate

Standard 1/4 - 20 screw for most 35mm cameras.
The same as the CU-81 but with stabilizer for long lenses

CU-84 Stabilizer Quick Release Plate

Larger 3/8 screw for most medium format cameras
The same as the CU-82 but with stabilizer for long lenses

CU-3011 Large Camera Plate
Has 1/4 - 20 screw with retracting video pin

Thank you Eric Swanson who identified the Bilora 810 as taking the QS-29.

Shop this site using and credit and debit cards.

Spartan Photo Center, Inc.
PO Box 160642
Boiling Springs, SC 29316
For Customer Service Call 864-583-6835
Copyright © 2005, 2006, 2007, 2008 Spartan Photo Center, Inc, BogenTripodParts.com and TripodQuickRelease.com. All rights reserved.
Last modified: 10/09/08.